Run-Tape Dynamic FN-4 5m 30W

LED chase light with adjustable light colour for milling groove  

Description:

The LED running light provides versatile lighting with an adjustable light colour from 2700 K (warm white) to 5000 K (cool white). It creates bewegte Lighting effects without visible LED Points, quick and easy installation in a 4 mm wide and 8 mm deep milled groove. The Strip are all 50 mm can be shortened. Light colour and brightness are dimmable, and the running speed is adjustable. Ideal for flexible atmospheric lighting. The corresponding Run-Controller Dynamic BLE control is required as an accessory.

Connection:

LED-Trafo DC 24V

Energy efficiency:

LED: 160 lm/W; Leuchte: 140 lm/m (23 lm/W)

Special features:

• • Quick and easy installation in a Milled groove
  • Strip all 50 mm can be shortened (Marking)
  • Light colour: 2700 - 5000 K (Dynamic) adjustable
  • Full run when switching on, idle run when switching off and many other effects adjustable via the app
  • Incl. Connection cable 2,5 m with Dynamic Plug
  • Design: Flexible LED strip
  • LED Transformer DC 24 V
  • Connector system: Dynamic
  • Protection rating: IP20
  • Dimmable with compatible control

Hinweis:

• Max. 5 m Tape per connection cable
• The power of partial sections cannot be calculated linearly; please determine it in the configurator!
• Only operate with a suitable power supply for LED Transformer DC 24 V and Dynamic connector system