Verlängerung IR-Sensor 10mm Länge 2m

touchless switch/dimmer for 10 mm cut-out  

Description:

Connection:

Special features:

• • For Extension the Sensor cable
  • LED Transformer DC 24 V
  • Approach or. Door movement releases Switching circuit made of
  • Function 1 (Lieferzustand): Lichteinschaltung with erster Movement, -ausschaltung with folgender
  • Function 2 (kurzer Tastendruck, see Zeichnung): When Open the Door switches the Licht a – and when Close the Door again made of (with 2 Sensoren geht the Licht to, sobald a Door geöffnet is)
  • The in Function 1 set Brightness is with Umschaltung on Function 2 beibehalten
  • For Switch or Dim of LED-Lights 24 V
  • For 10 mm Holes
  • Distance between Sensor and Inside of the door should 2 to 50 mm amount to (depending on the surface)
  • With Memory-Function (after Disconnection from the mains is the previous Dimming level restored)
  • Connector system: LED 24

Hinweis:

• The angeschlossene Light can be dim, when in the eingeschalteten State the Hand or a Gegenstand for einige Seconds in the Detection range of the IR-Schalters gehalten is (only in Function 1)
• Observe compatibility, permissible connected load and operating instructions
• Suitable for: IR-Sensor

Further Information: