The Milled Profile IC 16/12 mm is a clippable, asymmetrical recessed aluminium profile designed for installation in a milled groove and for interior lighting in furniture, cabinets and shelving. The asymmetrical position of the LED strip directs the light into the furniture interior, illuminating precisely the areas where it is needed. With a minimal visible projection of only 0.6 mm, the profile integrates discreetly into the furniture and is also suitable for vertical installation.

Combined with the 8 mm Tape COB-8FC and the highly frosted diffuser, the profile creates a continuous, soft line of light without visible individual light points. Its asymmetrical geometry directs the light precisely into the furniture interior.

Matching end caps provide a neat finish for the profile ends and the radii of the milled groove. Separate mounting clips secure the profile reliably. The aluminium profile is available in black and in a warm stainless-steel look developed specifically for wooden furniture.

From a quantity of one, the Hera Online Configurator allows the required length and cable outlet position to be specified. A complete made-to-measure solution can also be configured for several shelves or furniture compartments. After ordering, pre-assembled luminaires are supplied, ready to be inserted into the furniture and connected to the power supply.

The IC 16/12 is a professional LED recessed profile for furniture, cabinet lighting, shelf lighting, display cabinet lighting and custom furniture-lighting systems for homes, kitchens, wardrobes and retail interiors.

Technical specifications

• Profile type: clippable, asymmetrical recessed aluminium profile for reverse asymmetrical illumination; LED strip inclined by 20°
• Material: aluminium
• Dimensions: external width 16 mm; profile height 10.9 mm; routed groove 14 × 12 mm; visible projection 0.6 mm
• LED strip: for 8 mm LED strips; particularly suitable for Tape COB-8FC; LED-strip connector clips are not compatible
• Colours: black; warm stainless-steel look for wooden furniture
• Processing and installation: can be cut to the required length and is easy to install; separate profile mounting clips, recommended spacing approximately 30 cm; matching 12 mm heavily frosted cover profile (diffuser) and end caps