LED tape for colourful lighting scenes and pleasant extra-warm white light.

RGBW Tape-2 is a flexible, self-adhesive RGBW LED strip for furniture lighting, retail interiors, hotels and restaurants. In addition to red, green and blue, it features a separate channel for genuine extra-warm white light at approximately 2700 K.

The strip is mounted using double-sided adhesive tape and can be cut at the marked points every 50 mm. Matching supply leads, connecting leads, transparent connecting clips and corner clips enable straight runs and installations around corners. A maximum of 6 m is permitted per supply lead.

Depending on the control concept, RGBW controllers are available for radio, DALI DT6/DT8, BLE (Bluetooth Low Energy), ZigBee/Alexa and Casambi. The radio controller restores the last selected light colour and brightness after a power interruption. Four lighting scenes can be recalled individually.

Technical Features

• Connection: 24 V DC LED transformer
• Service life: L70/B50 ≥ 36,000 hours
• Energy efficiency: luminaire RGB / white: 1033 / 457 lm/m (51 lm/W)
• Colour rendering: white: Ra/CRI > 80
• Dimensions: 10 × 2 mm
• IP rating: IP20
• Cutting intervals: every 50 mm
• Maximum length: 6 m per supply lead
• Versions: 2.5 m with 350 LEDs / 47 W and 5 m with 700 LEDs / 83 W
• Included: 2.4 m supply lead with RGBW connector

The power consumption of cut sections cannot be calculated proportionally. Please use the configurator to determine the required wattage.

RGBW Tape-2 combines versatile colour effects with extra-warm white light for atmospheric accent lighting.