IR-DS with K 59 sensor AE

Contactless door contact switch with different sensor heads  

Description:

Touchless IR-Door contact-Switch for 220–240 V / 50–60 Hz for connecting Lights-Control gear the Protection class II. A Door movement on the Sensor head K 59 releases the Switching circuit made of. The light switches on when the door is opened and switches off again when the door is closed. The Mains connection cable is 3 m and the Switching cable 0,3 m long. Beide Cables are stripped and with Wire-end ferrules for Connection to Screw- or Plug-in terminals versehen. The Sensor cable with a Sensor head K 59 is 3 m long. Suitable For switching LED Transformers up to 250 W or SlimLite®-Lines of light with Up to 3 Lights. Depending on the surface, the distance between the sensor and the inside of the door should be 4 to 50 mm amount to.

Connection:

220 - 240V / 50 - 60Hz

Special features:

• Touchless IR door contact switch for 230 V
• Door movement releases the Switching circuit made of
• When Open the Door switches the Licht a
• When Close the Door switches the Licht made of
• A Sensor head K 59
• Sensor cable: 3 m
• Mains connection cable: 3 m, stripped and with Wire-end ferrules
• Switching cable: 0,3 m, stripped and with Wire-end ferrules
• For Connection to Screw- or Plug-in terminals
• For protection class II luminaire control gear
• For SlimLite® lines of light with up to 3 luminaires
• Distance between sensor and inside of door: 4 to 50 mm, depending on the surface
• Protection rating: IP20
• 220–240 V / 50–60 Hz
• Door movement releases Switching circuit made of
• Licht switches when Open the Door a
• Licht switches when Close the Door made of
• 3 m Sensor cable
• 3 m Mains connection cable, stripped and with Wire-end ferrules
• 0,3 m Switching cable, stripped and with Wire-end ferrules
• For switching LED Transformers up to 250 W

Hinweis:

• Installation and mains connection must be carried out by qualified personnel only

Further Information:

See FAQ